The latest Camius PoE wired security cameras for business and home surveillance deliver super HD 2K video and audio in addition to Smart Motion, Intelligent Sound, AI Human & Vehicle Detection, Cross Counting Detection with 24/7 recording, push notifications, NVR software, and more. The security system with the highest recording bandwidth will satisfy any home and business owner’s security requirements.
Plug-N-Play PoE NVR Camera System for Home and Businesses
Camius 8 Channel NVR has a built-in PoE switch that makes the setup process easy and quick. The network video recorder assigns a unique IP address to the Camius IP camera. No more complicated IP camera configuration.
The PoE NVR camera system is expandable to 8 IP channels. You can add 2K and 4K PoE cameras to the same setup. A high 128Mbps bitrate allows viewing life and recording footage with ultra HD resolution.
Easy to install Power-Over-Ethernet IP Camera Kit
Plug and Play PoE IP security camera systems are even simpler using Camius PoE cameras with one of the PoE NVRs (PoE DVR) from Camius. Once you plug Cat5e network cables into the NVR’s PoE (LAN) ports, you instantly add PoE cameras; recording starts immediately without going through settings.
Once the camera is plugged into the NVR’ PoE port, you will see PoE power consumption by selecting the ‘PoE Power‘ tab.
The latest video and audio compression
Video compression is essential when choosing a security system. It determines video clarity, hard disk usage, and network bandwidth. Camius security devices, including IP cameras and NVR network video recorders,s support not only H.264 but also H.265+, which is considered the best video compression standard to optimize all three areas.
As a result, it saves up to 50 percent on the recorder’s storage space and improves bandwidth efficiency to maximize your eight-channel 4K security NVR & internal hard drive storage. In addition, using the NVR, you can control Camius camera audio settings.
Mainstream encoding support full 2K video resolution (2880 x 1620) at full 30 frames in addition to high bitrate
Recording & Alerts
You can customize your NVR security system recording, including Normal 24/7, Motion. The NVR network video recorders also support PIR recording if you add Camius PIR cameras in the future. However, only ‘Normal’ recording (in green) is enabled by default. For motion recording, you’d need to set a recording schedule.
PoE NVR system with precise, smart motion detection
PoE dome security cameras support smart video motion detection when the camera detects only Motion, pedestrian, Vehicle, or Vehicle & Pedestrian. As a result, it improves detection levels. It allows users to set detection areas under setup for IP cameras; a schedule is available for detection hours and days. Video motion detection triggers PoE NVR system recording and other actions on your Camius NVR. You can set motion recording as the only recording method to save on disk space or activate motion recording and standard 24/7 recording to record everything while having easy access to video footage triggered by Motion.
How to set the motion detection area:
The whole screen is marked for default motion detection (red blocks). If you want to disable the motion detection on a specific area, click the grid cursor and drag the mouse to highlight the scope to unmark the area into transparent blocks. After you complete the setting, click the right button of your mouse to return and click Save to make the area setup effective.
Select the recording type you need (Green is for Normal, Yellow is for Motion), set the Record Schedule, and apply and copy to other channels if required. Once it is one, you will have access to the event recording not only on your NVR, but you can also play them on your CAMIUS VIEW smartphone app.
Note: if you are looking for PIR recording, check the following Camius NVR kit with deterrence
IP Camera Kit with Intelligent and A.I. Detection
Camus’s latest 2K cameras offer detection using AI analysis. It goes beyond video motion detection, allowing the user to create zones for detecting movement patterns, location, etc. You can activate one of the AI detections to get precise reports and analytics. AI Detection will trigger recording, email, or push notifications in addition to video recording in a unique color and tag.
Once you enable Human & vehicle detection (PD & VD), you can effortlessly search for the footage and receive push notifications triggered by humans or/and vehicles on your smartphone.
AI Detection includes:
AI Detection includes:- Human & Vehicle Detection (PD&VD)
- Perimeter Intrusion Detection (PID)
- Line Crossing Detection (LCD)
- Cross Counting (CC)
- Face Detection (FD)
In addition, you can analyze footage using the Heat Map (HM). You can enable one of the AI detections simultaneously and then allow push notifications on your mobile app
2K Video
The IP security camera records 2K video, 2.5 times the pixels of an HD 1080p security camera. Instead of 1920 × 1080, over 2,000,000 pixels, this 2K camera can record a pixel ratio of 2880 x 1620 with 30 frames. More pixels delivered by the security camera allow you to get more enhanced picture details when you zoom in.
2K dome security cameras deliver the latest and best features:
- Crisp, clear 2K video 2880 (H) x 1620 (V) with 30 frames per second with a 1/2.7” Progressive CMOS Image Sensor
- Super wide-angle 2.8mm lens with horizontal 110°, vertical 58°, and diagonal 133° field of view
- Built-in microphone for listen-in and recording audio
- Motion and Sound Detection
- AI Detection, including Human & Vehicle, Cross Counting, Rear Sound Detection, and more, along with Heat Map, Statistics (Reports)
- 100ft Night Vision (color in low light conditions)
- Wide Dynamic Range, Corridor, Mirror Mode
- Metal white enclosure
Outdoor Bullet PoE Security Cameras offer the following:
- 2K video 2880 (H) x 1620 (V) with 30 frames per second with a 1/2.7” Progressive CMOS Image Sensor
- 3.6mm lens with a horizontal 91°, vertical 46°, and diagonal 110° field of view
- Built-in microphone for listen-in and recording audio
- Motion and Sound Detection
- AI Detection, including Human & Vehicle, Cross Counting, Rear Sound Detection, and more, along with Heat Map, Statistics (Reports)
- 100ft Night Vision (color in low light conditions)
- Wide Dynamic Range, Corridor, Mirror Mode
- Metal white enclosure
Night Vision
Dome and Bullet IP cameras produce color night vision in the low-light environment. In complete darkness, cameras deliver a black and white picture. The cameras’ infrared distance is 30 to 100 feet.
Highly customizable image control settings
Camius 2K security IP cameras have highly customizable image settings, which you can control directly in the NVR. You can select the best IR settings, including the IR-cut mode, IR cut delay, IR LED mode, and even the level of IR LED lights (low beam light). In addition, you can also control the camera’s view using the Lens Flip, Angle Flip, selecting Corridor mode, enabling WDR (wide dynamic range), and even more. You can also save default settings by clicking on the ‘Default‘ tab.
Audio
This NVR security system supports audio recording. The camera has a high-performance built-in microphone; you can customize audio settings (such as volume and compression) using the camera’s web client. You can also turn on and off the camera’s audio. Moreover, you can enable Sound detection triggering recording, various alerts, and picture/video upload to your FTP server or Cloud (Dropbox or Google Drive).
Smart & Customized Notifications
It will inform you of anything happening on your property with instant push notifications to your smartphone. The NVR’s 128Mbps bitrate allows live view and playback videos at Ultra HD resolution. In addition, you can customize security camera alerts on a smartphone using Camius View app.
You can select alarm settings triggered not only by Motion, sound, and AI detection but by hard drive errors if the disk runs out of space (in those cases when you don’t select the hard drive to overwrite footage periodically) or camera video loss.
Security Cameras for Home & Business with Remote Access
Once you enable the recording schedule, you will start receiving not only push notifications on your smartphone app (Camius View), but you will have access to the event recordings.
Click here on how to add your security cameras to the app.
You can control your security cameras remotely from where ever you are.
You can select Push notifications triggered by different events, including the hard drive error or if the hard drive is out of space, if any of the cameras or complete systems are disconnected, Motion, PIR, Human & Vehicle Detection.
Camius VMS Software
Camius security systems go beyond the HDMI monitor and smartphone app. The free NVR software can turn any desktop, laptop, PC, or Mac into a 24/7 surveillance station. Users can monitor live video and audio streams in addition to playback and manage cameras with access to device settings. This software is excellent for multiple installations as it can combine cameras connected to a Camius NVR and individual Camius cameras on one screen. In addition, the software can display up to 128 cameras on the same screen and manage multiple devices from different locations.
What’s in the box:
- 8 Channel NVR with 3TB HDD (IPVAULT1128PR 3TB HDD)
- 2 x 2K Dome Security Camera (IRIS528R)
- 2 x 2K Bullet Security Camera (BOLTX536R)
- 4 x 60ft CAT5E cables
- NVR’s power supply with a power cord, 3ft HDMI cable, 3ft ethernet cable, USB mouse, Quick Setup Guide
