posts
Best Options to Upgrade Your Security Camera System
If your security camera system is old or otherwise outdated, then you should definitely think about upgrading your security cameras and recording system with modern
Articles
Read More »
FAQ
How to enable Human & Vehicle Detection with push notifications?
How to enable Human & Vehicle Detection with push notifications? To have playback of events for which you receive notifications triggered by Human & Vehicle
FAQ
What is Post Recording, and how to enable it?
What is Post Recording, and how to enable it? Post recording determines how long your recorder will record after an event occurs. You can set
FAQ
What is pre-recording, and how to enable it?
What is pre-recording, and how to enable it? Pre-Recording sets how long your DVR or NVR (network video recorder) will record before an event occurs. Among
FAQ
How to disable menu logout on the DVR and NVR?
How to disable menu logout on the DVR and NVR? If you don’t wish to log out of your Camius DVR (digital video recorder) or
FAQ
How do I add IP cameras on a network that are not connected directly to the NVR’s PoE ports?
Question: I have IP cameras on the PoE switch in the network. The search is greyed out. How do I add them to the Camius
FAQ
How to configure Camius NVR using a web browser?
To quickly find the PC’s NVR (network video recorder) IP address, visit camius.com/support to download and install the Camius Device Config Tool. Click on the
FAQ
How to reset an IP camera password
You can reset the camera to factory settings, including the password, by pressing the reset button on the camera. Remove the ‘RESET / micro SD‘
FAQ
How to activate Motion Detection
How to activate Motion Detection To make sure Motion Detection is activated, please check the following settings: On the NVR interface, move the mouse cursor
FAQ
How to set up deterrence on my NVR?
The deterrence function works with Spotlight IP cameras, which have deterrent capabilities such as a siren and a strobe or warning light. Seelect the ‘Light‘
FAQ
How to check my NVR or DVR’s system log?
On the NVR interface, move the mouse cursor to the bottom left and click the main menu button, then click Setup >> System >> Log >> Log Type ‘All’